Product Projects     Mechanical Contracting Projects
Industry: Power Generation
Project Type: New Construction
Owner: Forney Power
Location: Forney, TX
Contract Value: $1,200,000
Scope of Work:

Turbine Building:
Designed, provided and installed ventilation system consisting of (50) 54” diameter roof exhaust fans (Moffitt brand) and (54) 12’w x 8’ acoustical wall louver assemblies. Controlled by a central DDC panel designed and manufactured by Moffitt Corporation. Moffitt performed all software programming and start up.

Administration/Warehouse Building:
Designed, provided and installed an HVAC system consisting of a 30Ton DX packaged unit with VAV control for the Administration area. The warehouse was ventilated using exhaust fans and wall louvers (Moffitt brand) and heated with electric unit heaters.

Control Building:
Designed, provided and installed an HVAC system consisting of (2) 100% redundant 15 Ton packaged DX packaged units for the Control Room. Included a 95% efficient filter box system and humidification.

Battery Building:
Designed, provided and installed HVAC system consisting of a 10 Ton DX packaged unit for the Battery room with redundant explosion proof exhaust.
Moffitt Corporation has designed, provided and installed HVAC systems for over (30) major Power Generation projects from 2000-2003.

Industry: Power Generation
Project Type: New Construction
Owner: Caledonia Power
Location: Steens, MS
Contract Value: $500,000
Scope of Work:

Turbine Buildings (Quantity 0f (3)):
Designed, provided and installed a ventilation and heating system consisting of (12) 48” diameter roof exhaust fans (Moffitt brand) and and (24) electric unit heaters. Controlled by individual thermostasts.

Electrical Rooms (Quantity of (3)):
Designed, provided and installed an HVAC system consisting of (3) 17.5Ton DX packaged units system.

Control/Office Building:
Designed, provided and installed an HVAC system consisting of (2) 50% redundant 8.5 Ton DX packaged units.

Auxiliary Boiler Building:
Designed, provided and installed a ventilation and heating system consisting of exhaust fans, wall louvers (Moffitt brand) and electric unit heaters.
Moffitt Corporation has designed, provided and installed HVAC systems for over (30) major Power Generation projects from 2000-2003.

Industry: Glass Manufacturing
Project Type: New Construction
Owner: Longhorn Glass
Location: Houston, TX
Contract Value: $750,000
Scope of Work:

Furnace Building:
Designed, provided and installed a ventilation system consisting of (1) 190’ run of 15’ throat and (6) 35’ runs of 6’ throat gravity ventilators, (3) 72” diameter wall supply fans and (20) 18’ wide x 20’ high wall louvers systems (All Moffitt brand).

Lehr Building:
Designed, provided and installed a ventilation system consisting of (1) 96’ run of 9’ throat gravity ventilators, (3) 48” diameter roof supply fans and (8) 18’ wide x 14’ high wall louvers systems (All Moffitt brand).

Warehouse Building:
Designed, provided and installed a ventilation system consisting of (8) 60” diameter wall supply fans and (8) 48” diameter roof supply fans with outlet duct and diffuser system.
Moffitt Corporation has been has provided and installed ventilation systems for over (30) glass plants since 1991.
Moffitt continuous gravity ventilators

Moffitt wall exhaust fans

Industry: Aluminum Casting
Project Type: Retrofit
Owner: AAP/ST. Mary’s
Location: St. Mary’s, OH
Contract Value: $1,000,000
Scope of Work:

Casting and Fabrication Building:
Designed, provided and installed a plant wide ventilation system to reduce the heat stress on the operating personnel. The system consisted of numerous wall supply fans, numerous roof supply fans with outlet duct systems and exhaust gravity ventilation systems (all Moffitt brand). The system also consisted of (6) 17.5 Ton DX packaged AC systems ducted to operating stations throughout the facility to provide spot cooling. A digital process controller programmed and installed by Moffitt Corporation controls the entire system. Additional scope requirements included starters and power wiring as well as structural modifications.

Air Handling Unit with discharge
ducting and equipment stand


(2) Moffitt continuous Gravity
Ventilators – 48” throat size


Industry: Administration Facility
Project Type: New Construction
Owner: Duke Energy
Location: Sandersville, GA
Contract Value: $200,000
Scope of Work:

Administration Building:
Designed, provided and installed a split HVAC system consisting of (1) 20 Ton and (1) 10 Ton DX unit and VAV control. Warehouse space was ventilated using gravity ventilation and intake louvers (Moffitt Brand) and electric unit heaters.

Industry: Cement
Project Type: New Construction
Owner: Titan
Location: Medley, FL
Contract Value: $500,000
Scope of Work:

Electrical Buildings (Quantity of (7):
Designed, provided and installed HVAC systems for each electrical room consisting of 50% redundant DX packaged units. Cooling load of each Electrical building ranged from 6 Tons to 40 Tons and was controlled by individual thermostats. All duct systems were wrap insulated. PLC rooms were cooled using wall mount packaged AC systems.

Process Buildings (Quantity of (6)):
Designed, provided and installed ventilation systems for each process building. Each building had various wall supply fans with v-bank filter boxes (Moffitt Brand) and pressure relief dampers to provide positive pressure ventilation.


Industry: Brick and Tile
Project Type: New Construction
Owner: Triangle Brick
Location: Merry Oaks, NC
Contract Value: $200,000
Scope of Work:

Kiln and Process Building:
Designed, provided and installed a plant wide ventilation system to reduce the heat stress on the operating personnel and to allow for faster cooling of the product. The system was a Pressure Gravity system consisting of 3 foot throat continuous ridge gravity ventilators and (16) 60” diameter wall supply fans (All Moffitt brand). The system worked so well at cooling the facility that Triangle Brick had Moffitt install identical systems in two subsequent plants.


Industry: Paper
Project Type: Retrofit
Owner: Rexam DSI
Location: Watertown, NY
Contract Value: $300,000
Scope of Work:

Wet End and Dryer Section:
Designed, provided and installed a plant wide ventilation, heating and humidity control system to reduce heat in the summer and eliminate fogging and condensation in the winter. The system consisted of (3) 60,000CFM and (1) 30,000CFM direct gas fired make up air units. Additional powered roof exhaust fans (Moffitt brand) were installed as well. A central process controller programmed by Moffitt Corporation controlled the system. The system functions automatically, has improved ventilation and eliminated their condensation problem.


Industry: Waste Water Treatment
Project Type: New Construction
Owner: U.S. Army
Location: Fort Riley, KS
Contract Value: $800,000
Scope of Work:

(9) Buildings; Headworks, UV, RAS/WAS, Control/Administration, Chemical, Aerobic, Solids, CF Pump Station and MP Pump Station:
Each building consists of various quantities of gas fired make up air units, exhaust fans, intake louvers, packaged DX air conditioning units, electric heaters, hoods and ductwork. Responsibility includes complete controls wiring for all systems.

Industry: Steel Manufacturing
Project Type: New Construction
Owner: Worthington Steel
Location: Decatur, AL
Contract Value: $750,000
Scope of Work:

Cold Mill/Pickle Buildings:
Designed provide and installed a ventilation, heating and humidity control system. Consisted of a 48” throat by 1100-foot long continuous ridge gravity ventilator, (52) 60” diameter wall supply fans, (8) 48” diameter FRP wall exhaust fans, intake wall louvers and (13) 80,000CFM indirect gas fired destratification units (All Moffitt Brand). All equipment is controlled by a central process controller design and programmed by Moffitt Corporation to maintain and record desired indoor air quality conditions.
Moffitt Corporation has designed, provided and installed ventilation, heating and air conditioning systems for over (40) major steel mill projects from 1991 to 1998.


Admin